Adblue Emulator for Trucks OBD2 version

50.00

Adblue Emulator for trucks – trucks OBD2 version, adBlue OBD2 is a Plug&Drive Ready device to mulate working adBlue systems and NOx sensors on trucks, which equipped with EURO 4/5 DAF/SCANIA/IVECO/VOLVO/FORD/MAN/RENAULT/BENZ catalytic converter systems, even with damaged Adblue SCR system. dBlueOBD2 is easy to install. Main functions: Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned, will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors, does not damage the engine and not cause any negative effects to the truck factory setting, does not change any of the settings permanently.

Package contains:

1 x Adblue Emulator for trucks DAF/SCANIA/IVECO/VOLVO/FORD/MAN/RENAULT/BENZ  OBD2 version device
1 x User’s manual (English)

Warehouse: In stock
LT/LV/EE Delivery time: 1-3 working days
Europe Delivery time: 7-10 working days
International Delivery time: 10-12 working days
Express Delivery time: 1-3 working days

Description

Installation and Calibration for DAF/SCANIA/IVECO/VOLVO/FORD/MAN/RENAULT/BENZ Trucks:

1. Pull the Key out from the ignition.
2. Remove the following Fuses:
2.1 Remove the following Fuses (DAF) 6 – 15A E357 – 20A
2.2. Remove the following Fuses (SCANIA) Terminal- 42
2.3. Remove the following Fuses (IVECO) Terminal – 5 Terminal – 15
2.4. Remove the following Fuses (MAN) 894 – 737 – 738
2.5. Remove the following Fuses (VOLVO) F10
2.6. Remove the following Fuses (MERCEDES BENZ) F1
2.7. Remove the following Fuses (FORD) Terminal – 15 , Terminal – 30
2.8. Remove the following Fuses (RENAULT) » 25A » P59
3. Plug adBlueOBD2 into OBD2 connector
4. Turn on the ignition and check the level of adBlue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.