Description

Language: English
Quality: PIC18F458 real chip (Possible to upgrade/downgrade firmware)
Compatible Software: V2014
Operating systems: Windows XP, Windows 7, Windows 8, Windows 10
System updates: Available
Internet connections: Available
Warranty: 12 months

Functions:

• • It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.;
  • The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test;
  • The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples;
  • Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication;
  • PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000);
  • Fault codes will be shown with all available information.

Features:

• Full status information (Present, Not present, Intermittent);
• You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window;
• The program shows you measuring block information on many control module, you can choose anything from the list on your own;
• The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bo-sch units are faster (using KWP-2000), and the newest CAN based control units are very fast!

Supported protocols:

• PIN6-PIN1
• PIN3-PIN1
• PIN1
• HSCAN – Dual-wire, High Speed CAN-BUS, 500 kbps
• MSCAN – Dual-wire, Medium Speed CAN-BUS, 95 kbps
• SWCAN – Single-wire, Low Speed CAN-BUS, 33.3 kbps