Akcija!

ECUHELP HTprog Programeris (Pilnos versijos)

Original price was: 400.00€.Current price is: 350.00€.

ECUHELP HTprog yra naujasis ECU Chip tiuningavimo ir programavimo įranga. Palaiko tokias funkcijas kaip Bench, EEPROM, Raktų, ECU klonavimą. Įrenginys dirba vienas, nereikia papildomai naudoti KT200.

Pakuote sudaro:

1 x HTProg įranga
1 x MPS Modulis
1 x EEPROM Modulis
1 x V12 Maitinimo kabelis
1 x BDM kabelis
1 x Tricore kabelis
1 x USB kabelis
1 x Apsaugos raktas

Būsena: Turime
Pristatymo laikas: 1-2 darbo dienos

Produkto kodas: DIA0000391 Kategorija: Žymos: , , ,

Aprašymas

Atnaujinti įranga: Galima 
Naudoti interneto ryšį: Galima
Garantija: 12 mėnesių

HTprog support list:

1. HTprog ECU Clone Function List – Click here
2. HTprog on Bench Programmer Function List – Click here

HTprog Functions:

Chip Tuning / ECU Cloning
With HTprog you can read and write P-Flash,D-Flash, External Flash and external EEPROM with the option of automatically checksum correction, you will have many methods in most of ECUS :

  • Factory mode (On Bench for most of ECU/TCU): with this option you don’t have to open the ECU cover. Just plug some wires for power and signals and you are ready to go.
  • Tricore Boot Mode for all Tricore ECU: Opening the ECU is mandatory to connect the boot wire on the ECU board.This method is useful when the ECU is not responding
  • BDM (Background debug mode)
  • JTAG for Renesas and Freescale

BDM Read / Write
With HTprog you are able to break the protection of immobilizers like CAS in BMW. EIZ / EIS in Mercedes Benz. BCM in Volkswagen and Porsche.etc.

Built in Editors
With HTprog you can edit many Flash data like:

  • Edit CAS3+ VIN, ISN and keys
  • Edit CAS4,CAS4+ VIN,and ISN
  • Edit mileage for BMW instrument clusters

Other functions
You can do key reset for many brands like Audi, BMW,MIN, Porsche, Toyota,Fiat, Renault…etc.

  • Read/Write a wide range of SOP8 EEPROMS.
  • Works side by side with Autohex to make keys.

Key Features

  • Master version. One License for all protocols on bench.
  • Supports one of the largest ECU/TCU list in Cars and Trucks for ECU cloning and Chip Tuning. Supports both old and latest ECU / TCUs from Bosch,Continental, Delphi, Marelli,Denso,
  • Tenic,TRW and Valeo.etc.

Reads all BMW long ISN from BMW DME and DDE including MD1 and MG in F/G series

IMMO BDM Read/Write
With HTprog you are able to break the protection of immobilizers like CAS in BMW, EIZ / EIS in Mercedes Benz.BCM in Volkswagen and Porsche…etc.

NOTE:

  1. It is advised to uninstall any antivirus software and disable the firewall before using the ECUHELP HTprog.
  2. It is important not to update the software to avoid any potential damage to the hardware.
  3. Activation of the HTprog is necessary and should be done using the user’s registered email address.
  4. Install software version: 1.0.45, free download HTProg software – Click here

HTProg Software Display:

Panašūs produktai